Stampede® 4X4 is bigger and stronger than ever with a new clipless body, extended chassis, and huge 5.3″ Sledgehammer® tires for an aggressive monster truck stance. Stampede’s all-new BL-2s™ brushless power system delivers effortless power for all-day fun with an added boost of torque for terrain-shredding burnouts and powerful acceleration. Stampede 4X4 also comes standard with Traxxas’ Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability.
Stampede 4X4’s BL-2s brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Stampede 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 kV is long-lasting and requires virtually no maintenance.
Stampede 4X4’s pre-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Stampede.
Stampede 4X4 now uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. A rugged internal cage attaches to the body with molded reinforcements to prevent pull-through damage. Tough roof and tailgate skids protect the body in the event of a rollover.
FEATURES:
- BL-2s™ Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (#3340)
- Three Programmable Drive Profiles
- Sport Mode - Forward / Brake / Reverse
- Race Mode - Forward / Brake
- Training Mode™ - 50% Forward / Brake / 50% Reverse (patented)
- Traxxas EZ-Set® one-button setup
- Built-in two-stage low-voltage detection for LiPo batteries
- NiMH battery packs: 6-7 cells (7.2 to 8.4 volts)
- LiPo battery packs: 2 cells (7.4 volts)
- 3300 kV Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 kV
- TQ™ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Extreme Heavy-Duty Upgrade Kit Installed
- Strengthened C-hubs, axle carriers, and steering blocks
- Extreme heavy-duty driveshafts
- Oversize diameter
- 6mm axles
- Steel wheel hexes
- Clipless ProGraphix® Body
- Tough reinforced bumpers
- Reinforced inner cage
- Rugged roof rollover protector
- Tailgate protector
- Holds tight for intense action
- Quick and easy removal
- Chassis
- Modular composite tub design
- Secure battery hold-down latch
- High angle bumpers
- Suspension
- HD-composite suspension arms
- Oil-filled Ultra Shocks
- White powder-coated springs
- Steering
- Chassis-mounted #2075 servo
- Dual bellcrank design with integrated servo saver
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Oil-filled steel gear front and rear differentials
- Large 32-pitch steel spur gear
- Wheels and Tires
- Large 2.8” graphite gray wheels
- Tall 5.3” Sledgehammer® tires
- Sealed Ball Bearings
- Hex hardware with Rust-Resistant Black Oxide Coating
SPECIFICATIONS:
- Length: 17.87 inches (454mm)
- Width: 13.10 inches (333mm)
- Ground Clearance: 2.44 inches (62mm)
- Weight: 5.98 pounds (2.7kg) without batteries
- Height: 8.34 inches (212mm)
- Wheelbase: 11.62 inches (295mm)
- Front Shock Length: 3.45 inches (88mm) - Long
- Rear Shock Length: 3.98 inches (101mm) - XX-Long
- Tires (pre-glued): 5.3 inches (133mm) tall Sledgehammer®
- Wheels: 2.8 inches (71mm) graphite gray wheels
- Speed Control: BL-2s™ electronic speed control
- Motor (electric): BL-2s™ 3300 kV sensorless brushless
- Gear Pitch: 32
- Overall Drive Ratio: 15.36:1
- Differentials: Hardened steel bevel, sealed, limited slip
- Chassis Structure / Material: Modular composite tub
- Brake Type: Electronic
- Drive System: Shaft driven 4WD
- Steering: Dual bellcrank with integrated servo saver
- Radio System: TQ™ 2.4 GHz (2-channel)
- Servo: Waterproof #2075
- Skill Level: 1
- Battery Compartment: 162mm x 47mm x 26mm
- Required Batteries: 4 “AA” (transmitter), Vehicle
- Motor Specs:
- Type: BL-2s 3300kV sensorless brushless motor
- Weight: 7.51oz (213g)
- Length: 3.15 inches (80mm)
- Diameter: 1.42 inches (36mm)
- Connector Type: Traxxas Quick Connect Motor Plug
- ESC Specs:
- Input Voltage (cells): 6-7 Cells NiMH / 2S LiPo
- Case Size: 1.53″ (39mm) x 2.31″ (59mm) x 1.21″ (31mm)
- Weight: 3.07oz (87g)
- BEC Voltage: 6.0 V
- Reverse Delay: Yes, with lockout
- Thermal Protection: Two-stage thermal shutdown
- Ports: Auxiliary fan
INCLUDES:
- Stampede 4X4 with BL-2s ESC and 3300 kV motor
- Quick Start Guide
- TQ™ 2.4GHz radio system
- High quality maintenance tools
What You’ll Need:
- Batteries - Stampede 4X4 requires a single NiMH or LiPo battery
- Charger - Traxxas EZ-Peak Live charger (#2971) is recommended for easy and fast charging performance
- AA Alkaline Batteries - Four AA alkaline batteries for the transmitter